Exp-Led - Canon imageRUNNER ADVANCE 6075 Series Service Manual

■ EXP-LED

COPIER > ADJUST > EXP-LED
PR-EXP Setting of Pre-exposure LED current
Lv.2 Details To set the current of the Cleaning Pre-exposure LED.
Increase the value when taking a measure for drum ghost.
Decrease the value when potential is not applied well.
Use case - When drum ghost is significant (drum pitch is not correct)
- When potential is not applied well
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this at the normal service.
Display/adj/set range 110 to 233
Unit 0.4 micro A
Default value 181
8
Service Mode > COPIER > ADJUST > EXP-LED
T-8-39
8 Service Mode > COPIER > ADJUST > EXP-LED
8-97
8-97