Canon imageRUNNER ADVANCE 6075 Series Service Manual page 661

• When Distribution Time and Timing to Apply of Distribution Setting are set to [Now] and
[Manual], respectively:
Confirm the firmware and press [OK] button. Now STEP 1 is successfully completed.
• When Distribution Time is set to [Set Time] in Distribution Setting:
Confirm the distribution schedule and press [OK] button. Now STEP 1 is successfully
completed.
6
Troubleshooting > Making Initial Checks > c. Manual Download and Update (On-site Update from Service Mode)
F-6-166
F-6-167
6 Troubleshooting > Making Initial Checks > c. Manual Download and Update (On-site Update from Service Mode)
STEP 2: Update using Updater
The firmware downloaded to the device can be updated using Updater functions.
When Timing to Apply is set to [Auto] in Distribution Setting in STEP 1, the firmware is
updated automatically. Only when Timing to Apply is set to [Manual], follow the steps below to
update the firmware.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User mode)] button on the control panel.
4). [Service Mode] screen is shown.
2. Press [Updater] button.
6-85
F-6-168
6-85