4
Parts Replacement and Clearning > Image Formation System > Removing the Toner Receptacle Tray
Removing the Toner Receptacle Tray
<Preparation>
1. Open the Front Upper Cover.
2. Remove the Toner Bottle.
<Procedure>
1) Remove the Toner Receptacle Tray.
• 1 Screw
• 1 Protrusion
4
Parts Replacement and Clearning > Image Formation System > Removing the Toner Receptacle Tray
CAUTION:
1. Be sure to fit the protrusion into the groove of the plate to install.
2. Toner can be accumulated in the Toner Receptacle Tray; therefore, be careful not to
spill toner when removing.
2) Clean the Toner Receptacle Tray with lint-free paper.
F-4-244
4-158
F-4-245
F-4-246
4-158