Downloading/Writing System Software (Automatic) - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Table of Contents

■ Downloading/Writing System Software (Automatic)

● [1]: Upgrade (Auto)

The version is compared between the host machine/option and the system software in the

USB memory storage device to download only the system software with newer version in the

USB memory storage device to the temporary storage area of the HDD.

In safe mode, only the following system software can retrieve the version information (the

version is compared).

SYSTEM, LANGUAGE, RUI, MERAPCONT, SDICT

As for system software of the host machine whose version information cannot be obtained,

the software for RCON is not downloaded, but other software are downloaded.

For the system software of the option that is not connected, it is handled as follows:

For the option that is not connected, the system software is not to be downloaded.

The system software of the options which are not connected are not downloaded.

After downloading is complete, this machine is automatically restarted to write the

downloaded system software to the HDD system area/flash ROM.

Operation procedure

1) Enter download mode.

2) Connect the USB memory storage device to the USB port.

Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Downloading/Writing System Software (Automatic)

3) Press the key on the Control Panel.

[1] -> [0]: To execute downloading/Any key other than [0] key: To return to the menu screen.

[[[[[ download Menu (USB) ]]]]]]]]]]]

-------------------------------------

[1]: Upgrade (Auto)

[2]: Upgrade (w Confirmation)

[3]: Upgrade (Overwrite all)

[4]: Format HDD

[7]: Clear downloaded files

[8]: download Menu 2

[9]: Other Menu

[Reset]: Shutdown

During downloading, download status is displayed on the Control Panel.

Show Quick Links

Table of Contents