Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1198

4) Secure the Signal Cable and the Power Supply Cable in place using the 2 Wire Saddles at
the back of the HDD Case Unit.
5) Free the cables from the 3 Wire Saddles at the front.
x2
9
Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
6) Fold extra length of the cable and secure it with the 2 Wire Saddles [A].
7) Connect the STS Cable (340mm (Light Blue); FM3-9152) to the Main Controller PCB 2 and
the Encryption Board.
• 2 Connectors
• 1 Edge Saddle
• 5 Wire Saddles
CAUTION:
Check that the STS Cable is connected properly at the time of installation because the
machine can operate even when the cable is not connected properly.
F-9-419
9 Installation > [TYPE-6] HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
x2
[A]
x2
Connector
x6
9-201
F-9-420
Connector
F-9-421
9-201