Canon imageRUNNER ADVANCE 6075 Series Service Manual page 472

4
Parts Replacement and Clearning > Image Formation System > Removing the Pre-transfer Charging Assembly Shutter Unit
<Installation Method>
1) Install the Pre-transfer Charging Assembly Shutter Unit.
• 3 Screws
x3
2) Pull the Shutter with your fingers to hook it to the Cleaner Unit.
4 Parts Replacement and Clearning > Image Formation System > Removing the Pre-transfer Charging Assembly Shutter Unit
CAUTION:
When installing the Motor Unit, fit the PCB into the slot.
F-4-222
NOTE:
Be sure to check that the rear shaft is secured.
3) Install the Motor Unit.
• 3 Claws
F-4-223
x3
4-151
F-4-224
F-4-225
4-151