3. Communication Test
This section describes how to check if the communication is normally done to the distribution
server and/or the file server.
1. Start [Service Mode] at Level 1.
1). Press [Setting/Registration (User Mode)] button on the control panel.
2). Press [2] and [8] buttons at a time on the control panel.
3). Press [Setting/Registration (User Mode)] button on the control panel.
4). [Service Mode] screen is shown.
NOTE:
CDS and RDS are another servers.
You need the communication test of CDS by all means even if You succeed in a
communication test of the RDS.
2. Press [Updater] button.
6
Troubleshooting > Making Initial Checks > Preparation > Network Settings
F-6-146
6
Troubleshooting > Making Initial Checks > Preparation > Network Settings
3. Press [Software Management Settings] button.
4. Press [Test Communication] button.
6-77
F-6-147
F-6-148
6-77