Canon imageRUNNER ADVANCE 6075 Series Service Manual page 700

E Detail
Location Item
Code Code
E121 -0001 -05 Title Laser Scanner Cooling Fan error
Remedy 1. Check the connection of the Connector.
2. Replace the Laser Scanner Cooling Fan (FM16).
Description The Fan stop signal is detected for 5 seconds or longer and
retry is failed 4 times in a row although the Laser Scanner
Cooling Fan (FM16) is turned ON.
E197 -0001 -05 Title Error in Main Driver PCB connection detection
Remedy 1. Check the connection of the DC Controller PCB (PCB1)
and the Main Driver PCB (PCB2).
DC Controller side: J411, J412, Main Driver side: J125,
J126
2. Check the Main Driver PCB (PCB2) power supply
connection.
Check the connection at the Main Driver side (J128) and
the DC Controller side (J414), and check the voltage.
3. Replace the Main Driver PCB (PCB2).
4. Replace the DC Controller PCB (PCB1).
Description Failed to establish a communication between the DC
Controller PCB (PCB1) and the Main Driver PCB (PCB2).
E197 -0002 -05 Title Error in Feed Driver PCB connection detection
Remedy 1. Check the connection of the DC Controller PCB (PCB1)
and the Feed Driver PCB (PCB3).
DC Controller side: J421, Feed Driver side: J204
2. Check the connection of the Feed Driver PCB (PCB3) and
the DC-DC Converter PCB.
Check the connection at the Feed Driver side (J218) and
the DC-DC Converter side (J9033).
3. Check the power supply of the Feed Driver PCB (PCB3).
Check if appropriate voltages are applied to the Feed
Driver side (12V to 1pin, 5V to 3pin, 3.3V to 4pin). -> If not,
replace the DC-DC Converter PCB.
4. Replace the Feed Driver PCB (PCB3).
5. Replace the DC Controller PCB (PCB1).
Description Failed to establish a communication between the DC
Controller PCB (PCB1) and the Feed Driver Pub (PCB3).
7
Error Code > Error Code > Error Code Details > E100 to E197
Description
7 Error Code > Error Code > Error Code Details > E100 to E197
E Detail
Location Item
Code Code
E197 -0003 -05 Title Error in Duplex Driver PCB connection detection
Remedy 1. Check the connection between the DC Controller PCB
(PCB1) and the Fixing Feed Drawer.
DC Controller side: J431, J432, Fixing Feed Drawer (host
machine side): J3002D
Fixing Feed Drawer (Fixing Feed side): J3002L, Duplex
Driver side: J300, J301
2. Check the connection of the Duplex Driver PCB (PCB4)
and the DC-DC Converter PCB.
Check the connection at the Duplex Driver side (J311) and
the DC-DC Converter side (J9034).
3. Check the power supply of the Duplex Driver PCB (PCB4).
Check if appropriate voltages are applied to the Duplex
Driver side (12V to 1pin, 5V to 3pin, 3.3V to 4pin). -> If not,
replace the DC-DC Converter PCB.
4. Replace the Duplex Driver PCB (PCB4).
5. Replace the DC Controller PCB (PCB1).
Description Failed to establish a communication between the DC
Controller PCB (PCB1) and the Duplex Driver PCB (PCB4).
E197 -0004 -05 Title Error in Relay PCB connection detection
Remedy 1. Check the connection of the DC Controller PCB (PCB1)
and the Relay PCB (PCB5).
DC Controller side: J451, Relay side: J514
2. Replace the Relay PCB (PCB5).
3. Replace the DC Controller PCB (PCB1).
Description Connection between the DC Controller PCB (PCB1) and the
Relay PCB (PCB5) is disconnected.
E197 -0005 -05 Title Error in Main Driver PCB Analog Connector connection
detection
Remedy 1. Check the connection of the DC Controller PCB (PCB1)
and the Main Driver PCB (PCB2).
DC Controller side: J413, Main Driver side: J124
2. Replace the Main Driver PCB (PCB2).
3. Replace the DC Controller PCB (PCB1).
Description Connection between the DC Controller PCB (PCB1) and the
Main Driver PCB (PCB2) is disconnected.
7-15
Description
7-15