Canon imageRUNNER ADVANCE 6075 Series Service Manual page 902

COPIER > OPTION > FNC-SW
REBOOTSW Restart setting at E240 error occurrence
Lv.2 Details To set whether to reboot in the case of E240 error.
In the case of E240 error, the machine is automatically rebooted due
to the possibility of continuous operation of the drive system while
the spooled print job is cleared.
Print job can be obtained if selecting the setting not to reboot.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - Do not use this at the normal service.
- Be sure to get approval from the user by telling the possibility of
continuous operation of the drive system in the case of E240 error.
Display/adj/set range 0 to 1
0: Rebooted, 1: Not rebooted
Default value 0
Supplement/memo E240 error: Communication error between the Main Controller and
the DC Controller.
SJB-UNW Reserve upper limit of secure print job
Lv.2 Details To set the upper limit for the number of reserved jobs in secure print
job.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: 50 jobs, 1: 90 jobs
Default value 0
WEBV-SW ON/OFF of WebDAV function
Lv.2 Details To set ON/OFF of WebDAV function.
OFF setting can reduce memory use of the machine. In addition, the
following WebDAV-related items are hidden in user mode.
- Settings/Registration> Set Destination> Register Destinations>
Register New Dest.> File> Protocol> WebDAV
- Settings/Registration> Function Settings> Send> Common
Settings> Use Divided Chunk Send for WebDAV TX
Use case When reducing memory use of the machine
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: ON, 1: OFF
Default value 0
Related user mode Settings/Registration> Set Destination> Register Destinations>
Register New Dest.> File> Protocol> WebDAV
Settings/Registration> Function Settings> Send> Common Settings>
Use Divided Chunk Send for WebDAV TX
Supplement/memo WebDAV function is equipped as standard with the machine.
8
Service Mode > COPIER > OPTION > FNC-SW
8 Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
CARD-RNG Card number setting (department number)
Lv.2 Details To set the number of cards (departments) that can be used with the
Card Reader.
Use case When setting the number of cards (departments)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 1000
Default value 1000
SJOB-CL Set of scan job canceling by logout
Lv.1 Details To set whether to cancel the scan job in operation by logout of the
user.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - The job in scanning operation cannot be canceled.
- Cancel by logout is kept in the log.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
Supplement/memo Scan job: A job after the scanning operation is completed.
USB-RCNT Auto connect set at USB device disconnct
Lv.2 Details To set to enable/disable automatic connection when the USB device
is disconnected.
With the setting to disable automatic connection, USB device cannot
be used if disconnecting and then connecting the USB device. To
enable connection again, the power needs to be turned OFF/ON.
With the setting to enable automatic connection, reconnection is
made after disconnecting, and then connecting the USB device.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution With the setting to enable automatic connection, disconnecting of 1
area makes automatic connection of all USB devices if there is USB
hub.
Display/adj/set range 0 to 1
0: No automatic connection, 1: Automatic connection
Default value 0
8-120
8-120