Removing The Flat Control Panel - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > External Auxiliary System > Removing the Flat Control Panel

Removing the Flat Control Panel

NOTE:
The same procedure is applied to both copier model and printer model.
1) Open the Toner Replacement Cover.
2) Open the Right Cover.
3) Remove the Right Upper Cover.
• 2 Screws
• 3 Protrusions
• 1 Boss
x2
4 Parts Replacement and Clearning > External Auxiliary System > Removing the Flat Control Panel
Boss
Protrusion
F-4-507
4) Close the Right Cover.
5) Remove the Right Rear Cover 2. (The removed cover and screws are no longer used.)
• 1 Screw
6) Remove the Side Cover.
• 1 Screw
• 2 Hooks
4-240
Protrusion
F-4-508
Hook
F-4-509
4-240