Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1083

22-2) Put the Card Reader External Relay Harness through the Cord Guide, and install the
cover of the guide.
NOTE:
• When installing it, be sure [A] part does not interfere when opening/closing the Right Rear
Cover 1.
9
Installation > Card Reader-C1/Copy Card Reader-F1 > Installation Procedure
<In the Case of Flat Control Panel>
[A]
F-9-205
9 Installation > Card Reader-C1/Copy Card Reader-F1 > Installation Procedure
22-1) Remove the cover of Cord Guide, and affix it to the area indicated in the figure.
NOTE:
Be sure to affix the Cord Guide above [A] area for not interfering to open/close the Right
Rear Cover 1.
[A]
22-2) Put the Card Reader External Relay Harness through the Cord Guide, and install the
cover of the guide.
9-86
F-9-206
F-9-207
9-86