Canon imageRUNNER ADVANCE 6075 Series Service Manual page 408

4
Parts Replacement and Clearning > Main Controller > Removing Main Controller PCB 2
<Preparation>
1. Remove the Box Cover (Right). (Refer to "Removing Main Controller PCB 1")
2. Remove the Main Controller PCB 1. (Refer to page 4-81)
3. Remove the Box Cover (Left).
3-1) Remove the Harness.
• 2 Wire Saddles
3-2) Remove the Box Cover (Left).
• 1 Claw
• 1 Protrusion
4 Parts Replacement and Clearning > Main Controller > Removing Main Controller PCB 2
F-4-56
Claw
Projection
F-4-57
4. Remove the Box Left Inner Cover.
4-1) Disconnect the Connectors.
• 2 Connectors
x2
4-2) Remove the Connector Cover.
4-87
F-4-58
F-4-59
4-87