Enabling Ugw Link - Canon imageRUNNER ADVANCE 6075 Series Service Manual

5. Press [Yes] button.
Obtain the download file information for communication test from the distribution server
(to execute the communication test to the distribution server).
Using the download file information for communication test, the contents for test are
downloaded from the file server (for the communication test to the file server).
6. Upon the communication test completed, the communication test result screen is shown.
Press [OK] button to exit this operation.
6
Troubleshooting > Making Initial Checks > Preparation > Enabling UGW Link
F-6-149
F-6-150
6 Troubleshooting > Making Initial Checks > Preparation > Enabling UGW Link

■ Enabling UGW Link

When installing the firmware in the method of "UGW-linked Download and Update" or "UGW-
linked Download", the following should be set before actually using UGW link.
Setting of Device
Service Mode
Service Technician (Level 1)
Setting of UGW
WebPortal
Setting of Authorities on
Sales Company's HQ
UGW WebPortal
NOTE:
• See "imageWARE Remote Operator's Manual / e-Maintenance Business Operation
Manual" for how to operate UGW WebPortal.
• [Distribute Firmware] should be set on [Customer Management] screen for staff in charge
of setting for [Enter customer information] or [Command for firmware distribution] in order
to allow them to select the desired device on [Firmware Distribution Information] screen.
6-78
COPIER >OPTION >FNC-SW >CDS-UGW
(0 -> 1)
In [Customer Management] screen, set [Do not
distribute firmware] to [Distribute firmware].
See "Analysis>Firmware Distribution
Information" to grant the appropriate authorities
to each account.
6-78