Sorter; Adjust - Canon imageRUNNER ADVANCE 6075 Series Service Manual

SORTER

ADJUST

SORTER > ADJUST
STP-F1 Front 1-staple position (R size)
Lv.1 Details To adjust the A4R/LGL/LTRR paper front 1-staple position on
Finisher.
As the value is incremented by 1, the staple position moves by 0.49
mm.
+: Toward front
-: Toward rear
The item can be also set with DIP switch of the Finisher (with
common setting range and setting value). The latest setting value is
enabled regardless of service mode/DIP switch.
Use case When the A4R/LGL/LTRR paper front staple position is displaced
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -6 to 6 (Even if the value out of range is set, the same result as that
of maximum/minimum value is expected.)
Unit 0.49 mm
STP-F2 Front 1-staple position(half size)
Lv.1 Details To adjust the A3/B4/A4/B5/LDR/LTR/EXEC/8K/16K paper front
1-staple position on Finisher.
As the value is incremented by 1, the staple position moves by 0.49
mm.
+: Toward front
-: Toward rear
The item can be also set with DIP switch of the Finisher (with
common setting range and setting value). The latest setting value is
enabled regardless of service mode/DIP switch.
Use case When the A3/B4/A4/B5/LDR/LTR/EXEC/8K/16K paper front staple
position is displaced
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -6 to 6 (Even if the value out of range is set, the same result as that
of maximum/minimum value is expected.)
Unit 0.49 mm
8
Service Mode > SORTER > ADJUST
8 Service Mode > SORTER > ADJUST
SORTER > ADJUST
STP-R1 Rear 1-staple position (R size)
Lv.1 Details To adjust the A4R/LGL/LTRR paper rear 1-staple position on
Finisher.
As the value is incremented by 1, the staple position moves by 0.49
mm.
+: Toward front
-: Toward rear
The item can be also set with DIP switch of the Finisher (with
common setting range and setting value). The latest setting value is
enabled regardless of service mode/DIP switch.
Use case When the A4R/LGL/LTRR paper rear staple position is displaced
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -6 to 6 (Even if the value out of range is set, the same result as that
of maximum/minimum value is expected.)
Unit 0.49 mm
STP-R2 Rear 1-staple position (half size)
Lv.1 Details To adjust the A3/B4/A4/B5/LDR/LTR/EXEC/8K/16K paper rear
1-staple position on Finisher.
As the value is incremented by 1, the staple position moves by 0.49
mm.
+: Toward front
-: Toward rear
The item can be also set with DIP switch of the Finisher (with
common setting range and setting value). The latest setting value is
enabled regardless of service mode/DIP switch.
Use case When the A3/B4/A4/B5/LDR/LTR/EXEC/8K/16K paper rear staple
position is displaced
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -6 to 6 (Even if the value out of range is set, the same result as that
of maximum/minimum value is expected.)
Unit 0.49 mm
SDL-STP Adj of Saddle Stitcher staple position
Lv.1 Details To adjust the staple position of Saddle Stitcher.
As the value is incremented by 1, the staple position moves by 0.5
mm.
The item can be also set with DIP switch of the Finisher (with
common setting range and setting value). The latest setting value is
enabled regardless of service mode/DIP switch.
Use case When the staple position of the Saddle Stitcher is displaced
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -20 to 20
Unit 0.5 mm
Default value 0
8-207
8-207