Canon imageRUNNER ADVANCE 6075 Series Service Manual page 713

E Detail
Location Item
Code Code
E551 -0021 -05 Title Error in the Power Supply Fan of the Paper Folding Unit
Remedy 1. The connector of the Fan (F1) is disconnected.
2. The wiring of the Fan (F1) is faulty.
3. The Fan (F1) is faulty.
4. The Paper Folding Unit Controller PCB is faulty.
Description The loch signal is detected for the specified times while the
fan operates.
E562 -8001 -05 Title Error in Slowing Timing Sensor (Document Insertion/Folding
Unit-H1)
Remedy 1. Connector of the Slowing Timing Sensor (S24) is
disconnected.
2. Slowing Timing Sensor (S24) is faulty.
Description The receiving-light intensity failed to be within the threshold
although the emitting-light intensity is adjusted to be within
the threshold when adjusting the Sensor.
E562 -8002 -05 Title Error in Disengagement Timing Sensor (Document Insertion/
Folding Unit-H1)
Remedy 1. Connector of the Disengagement Timing Sensor (S21) is
disconnected.
2. Disengagement Timing Sensor (S21) is faulty.
Description The receiving-light intensity failed to be within the threshold
although the emitting-light intensity is adjusted to be within
the threshold when adjusting the Sensor.
E562 -8003 -05 Title Error in Folding Position Accuracy Sensor (Document
Insertion/Folding Unit-H1)
Remedy 1. Connector of the Folding Position Accuracy Sensor (S23)
is disconnected.
2. Folding Position Accuracy Sensor (S23) is faulty.
Description The receiving-light intensity failed to be within the threshold
although the emitting-light intensity is adjusted to be within
the threshold when adjusting the Sensor.
E562 -8004 -05 Title Error in the Upper Stopper HP Sensor (Document Insertion/
Folding Unit-H1)
Remedy 1. Connector of the Upper Stopper HP Sensor (S16) is
disconnected.
2. Upper Stopper HP Sensor (S16) is faulty.
Description The receiving-light intensity failed to be within the threshold
although the emitting-light intensity is adjusted to be within
the threshold when adjusting the Sensor.
7
Error Code > Error Code > Error Code Details > E500 to E5F6
Description
7 Error Code > Error Code > Error Code Details > E500 to E5F6
E Detail
Location Item
Code Code
E569 -8001 -05 Title Upper Stopper Motor of Paper Folding Unit failed to go
through HP (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the Upper Stopper Motor (M7) is
disconnected.
2. Upper Stopper Motor (M7) is faulty.
3. Connector of the Upper Stopper HP Sensor (S16) is
disconnected.
4. Upper Stopper HP Sensor (S16) is faulty.
Description The Upper Stopper HP Sensor failed to be OFF despite the
drive of specified pulse in the case that the Upper Stopper
Motor started to be driven while the Upper Stopper HP
Sensor was ON.
E569 -8002 -05 Title Upper Stopper Motor of Paper Folding Unit failed to return to
HP (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the Upper Stopper Motor (M7) is
disconnected.
2. Upper Stopper Motor (M7) is faulty.
3. Connector of the Upper Stopper HP Sensor (S16) is
disconnected.
4. Upper Stopper HP Sensor (S16) is faulty.
Description The Upper Stopper HP Sensor failed to be ON despite the
drive of specified pulse in the case that the Upper Stopper
Motor started to be driven while the Upper Stopper HP
Sensor was OFF.
E56A -8001 -05 Title C-fold Stopper Motor of Paper Folding Unit failed to go
through HP (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the C-fold Stopper Motor (M8) is
disconnected.
2. C-fold Stopper Motor (M8) is faulty.
3. Connector of the C-fold Stopper HP Sensor (S17) is
disconnected.
4. C-fold Stopper HP Sensor (S17) is faulty.
Description The C-fold Stopper Motor HP Sensor failed to be OFF despite
the drive of specified pulse in the case that the C-fold Stopper
Motor started to be driven while the C-fold Stopper Motor HP
Sensor was ON.
7-28
Description
7-28