Canon imageRUNNER ADVANCE 6075 Series Service Manual page 276

2
Technology > Embedded RDS > E-RDS Setup > Confirmation and preparation in advance
4) Proxy Settings
1. Select [TCP/IP Settings] from breadcrumbs of the left columns, and then Touch it.
2. Touch the [TCP/IP Settings] > [Proxy Settings].
3. Set the proxy server based on the result obtained in Information item 3 under "(2)
Advance preparations".
a) Use Proxy to [On].
b) Enter the server address.
c) Enter port Number (Validation: 1 to 65,535).
b)
c)
d)
d) If proxy server authentication is required, Touch [Set Authentication ].(see figure
above)
2 Technology > Embedded RDS > E-RDS Setup > Confirmation and preparation in advance
F-2-316
a)
F-2-317
e) Set the following items based on the result obtained in Information item 4 under
"(2) Advance preparations".
• Set Use Proxy Authentication to [On].
• Enter User name and Password, and touch the [OK] button.
f) Touch the [OK] button.
2-222
F-2-318
F-2-319
2-222