Remedy To Be Implemented When The Etb Disengage Member (Transfer Frame Stopper) Is Left Unremoved - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Remedy to be implemented when the ETB Disengage
Member (Transfer Frame Stopper) is left unremoved
When the power is turned ON after installation, E017-0003 may occur due to the ETB
Disengage Member (Transfer Frame Stopper) left unremoved.
When this error occurs, the ETB Disengage Member (Transfer Frame Stopper) is caught
between the ETB Unit and the plate of the machine and cannot be removed. Moreover, one
side of the Photosensitive Drum is in contact with the ETB Unit, so pulling out the Fixing Feed
Unit by sheer force may result in damage to the ETB Unit.
When the ETB Disengage Member (Transfer Frame Stopper) is left unremoved, follow the
following steps to implement remedy.
<Field Remedy>
1) Turn OFF the power.
2) Open the Inner Cover.
Loosen
6
Troubleshooting > Other > Remedy to be implemented when the ETB Disengage Member (Transfer Frame Stopper) is left unremoved
F-6-46
6 Troubleshooting > Other > Remedy to be implemented when the ETB Disengage Member (Transfer Frame Stopper) is left unremoved
3) Remove the Fixing Feed Right Front Cover.
• 2 Screws
x2
Fixing Feed Right Front Cover
4) Remove the Fixing Feed Right Front Upper Cover.
• 1 Screw
Fixing Feed Right
Front Upper Cover
6-26
F-6-47
F-6-48
6-26