Check Items when Turning OFF the Main Power
Check that the main power switch is OFF.
1) Turn OFF the main power switch.
2) Check that the Control Panel Display and the Main Power Lamp are turned OFF, and then
disconnect the power plug.
Installation Procedure
■ Removing the Covers
1) Push [A] part, and open the Right Rear Cover 1.
[A]
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Removing the C
2) Remove the Side Cover.
• 1 Screw
• 2 hooks
3) Free the Reader Communication Cable and the Reader Power Supply Cable from the 2
Wire Saddles.
4) Remove the Left Rear Cover.
• 2 Protrusions
F-9-339
9
Installation > [TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Removing the C
Hook
Hook
F-9-340
x2
Protrusion
F-9-341
9-156
9-156