Removing The Arcnet Pcb - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > External Auxiliary System > Removing the ARCNET PCB
2) Remove the Feed Driver PCB.
• 6 Screws
• 15 Connectors
x6
4 Parts Replacement and Clearning > External Auxiliary System > Removing the ARCNET PCB

Removing the ARCNET PCB

<Preparation>
1. Remove the Left Rear Cover. (Refer to "Removing Main Controller PCB 2".)
2. Remove the Rear Cover.
• 7 Screws
F-4-498
<Procedure>
1) Disconnect the ARCNET Cable (or the Terminal Connector).
x7
ARCNET Cable
4-237
F-4-499
F-4-500
4-237