4
Parts Replacement and Clearning > Pickup/Feed System > Removing the Registration Unit
CAUTION:
When installing the handle, be sure to follow the order as shown in the figure to tighten
screws.
x4
6) Free the harness and remove the Vertical Path Cassette Drive Unit.
• 1 Connector
• 3 Wire Saddles
• 6 Screws
x6
4
Parts Replacement and Clearning > Pickup/Feed System > Removing the Registration Unit
<Preparation>
1. Pull out the Fixing Feed Unit.
1-1)
1-2)
out the Fixing Feed Unit.
F-4-445
F-4-446
Removing the Registration Unit
Open the Front Cover.
Turn the Fixing Feed Unit Pressure Release Lever in the direction of the arrow to pull
4-221
F-4-447
4-221