Steps To Service Call Button Settings - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > Embedded RDS > E-RDS Setup > Steps to Service Call button settings

■ Steps to Service Call button settings

● Settings to display the service call button
1. Start [Service Mode] at Level 1.
For the procedures, see "Steps to E-RDS settings - step 1.".
2. Select [COPIER] > [Option] > [USER] > [SCALL-SW].
3. Touch the numeric button [1] on the control panel (the setting value is changed to 1) and
touch the [OK] button. (The data is reflected to the setting value field.)
2 Technology > Embedded RDS > E-RDS Setup > Steps to Service Call button settings
NOTE:
When the function is enabled, the [Service Call] button is displayed on the bottom of the
counter check screen (displayed by touching the counter check button).
● Steps for settings of service call completion
F-2-330
1. Start [Service Mode] at Level 1.
For the procedures, see "Steps to E-RDS settings - step 1.".
2. Select [COPIER] > [Option] > [USER] > [SCALLCMP].
F-2-331
2-227
F-2-332
F-2-333
2-227