Removing The Main Thermistor, Sub Thermistor2 - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > Fixing > Removing the Main Thermistor, Sub Thermistor2
2) Remove the Pressure Roller Static Eliminator.
• 1 Screw
4 Parts Replacement and Clearning > Fixing > Removing the Main Thermistor, Sub Thermistor2

Removing the Main Thermistor, Sub Thermistor2

<Preparation>
1. Pull out the Fixing Feed Unit. (Refer to "Removing the Fixing Assembly")
2. Remove the Fixing Assembly. (Refer to page 4-176)
3. Remove the Fixing Front Cover. (Refer to "Removing the Fixing Cleaning Web")
4. Remove the Fixing Upper Cover. (Refer to "Removing the Fixing Cleaning Web")
5. Remove the Fixing Cleaning Web. (Refer to page 4-180)
6. Remove the Fixing Drive Unit 1. (Refer to "Separating the Fixing Upper Unit from the Fixing
Lower Unit")
7. Secure the Shutter Drive Gear. (Refer to "Separating the Fixing Upper Unit from the Fixing
Lower Unit")
8. Remove the Heater Unit. (Refer to "Separating the Fixing Upper Unit from the Fixing Lower
Unit")
9. Separate the Fixing Upper Unit from the Fixing Lower Unit. (Refer to page 4-182)
F-4-345
10. Remove the Fixing Roller. (Refer to page 4-186)
<Procedure>
1) Remove the Harness Guide Cover and free the Harness from the Guide.
• 1 Screw
• Edge Saddle
• Harness Guide
4-190
F-4-346
4-190