Connection - Canon imageRUNNER ADVANCE 6075 Series Service Manual

NOTE:
When the accessory configuration is known for the machine where the system software
is to be downloaded, uncheck the boxes of unnecessary accessories. E753-0001 is
triggered if the software for an unnecessary accessory is downloaded. (If this occurred,
turn OFF/ON the power to recover the error.)
8) Click "OK" when the system software is successfully copied in the USB memory storage
device storage device.
6
Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Connection
F-6-122
6 Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Connection

■ Connection

CAUTION:
This machine does not communicate with SST once it recognizes a USB memory
storage device; therefore, SST and a USB memory storage device cannot be used at
the same time.
Preparation
Item to prepare: a USB memory storage device, which the system software for this machine
is stored.
Procedure
1) If a cross cable is connected to this machine, remove the cross cable.
2) Connect the USB memory storage device to the USB port.
USB memory
USB port
F-6-123
6-62
6-62