Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1079

7) Install the Card Reader Reply Unit.
• 2 Screws (Use the screws removed in step 5.)
• 1 Screw (TP; M3x6)
• 1 Connector
x3
8) Insert the Main Controller PCB 1 until it stops.
CAUTION:
Install the Main Controller PCB 1 while paying attention not to trap cables.
9) Connect the USB Cable and the Control Panel Cable.
9
Installation > Card Reader-C1/Copy Card Reader-F1 > Installation Procedure
10) Remove the screw. (The removed screw will be used in step 12).
11) Connect the Card Reader External Relay Harness.
F-9-192
9 Installation > Card Reader-C1/Copy Card Reader-F1 > Installation Procedure
x2
F-9-193
9-82
F-9-194
9-82