Canon imageRUNNER ADVANCE 6075 Series Service Manual page 643

Operation procedure
1) Enter download mode.
2) Connect the USB memory storage device to the USB port.
3) Press the key on the Control Panel.
[2] -> [0]: To execute downloading/Any key other than [0] key: To return to the menu screen.
[[[[[ download Menu (USB) ]]]]]]]]]]]
-------------------------------------
[1]: Upgrade (Auto)
[2]: Upgrade (w Confirmation)
[3]: Upgrade (Overwrite all)
[4]: Format HDD
[5]: Backup
[7]: Clear downloaded files
[8]: download Menu 2
[9]: Other Menu
/[2] has been selected. Execute?/
- (OK):0 / (CANCEL):Any other keys -
During downloading, download status is displayed on the Control Panel.
NOTE:
When the system software version in the USB memory storage device is the same or
older than the system software in the HDD, a message is displayed in each case to
confirm whether to overwrite or not.
Press the key on the Control Panel.
[0]: To overwrite/Any key other than [0]: Not to overwrite
6
Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Downloading System Software (Confirmation)
F-6-130
F-6-131
6 Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Downloading System Software (Confirmation)
Once downloading is complete, a message is displayed to encourage pressing the "Reset"
key.
4) Press the "Reset" key.
Shutdown sequence is executed.
5) Once the message on the touch panel disappears, turn OFF the Main Power Switch.
6) Remove the USB memory storage device.
7) Ensure the LED at the lower right on the Control Panel is turned OFF, and turn ON the
Main Power Switch.
Writing to the HDD system area/flash ROM is started after the startup. The screen shows
the countdown once the writing process is properly completed.
The screen shows the countdown once the writing process is properly completed. This
machine is restarted with the downloaded system software at the count of 0.
6-67
F-6-132
6-67