Canon imageRUNNER ADVANCE 6075 Series Service Manual page 535

4
Parts Replacement and Clearning > Pickup/Feed System > Cleaning the Pickup and Fixing Feed Assembly
22) Clean paper dust on the Duplex Outlet Sensor (PS64), Duplex Merge Sensor (PS67), and
Duplex Left Sensor (PS66) with a blower.
PS66
23) Clean a whole circumference of 5 Rollers by manually rotating them with lint-free paper
moistened with alcohol.
4 Parts Replacement and Clearning > Pickup/Feed System > Cleaning the Pickup and Fixing Feed Assembly
PS67 PS64
F-4-417
F-4-418
24) Place a paper on the Duplex Path. Then, point the leading edge of Blower to the Roller
frame to remove paper lint.
NOTE:
The Cleaning Brush is engaged with 4 Rollers, causing accumulation of paper lint. By
blowing air with the Blower, paper lint can be fallen down.
25) Insert the paper lint cleaning tool to the gap of Reverse Path [A] to remove paper lint.
[A]
26) Close the Duplex Path.
27) Install the Fixing Feed Cover (Upper).
28) Push in the Fixing Feed Unit.
4-214
F-4-419
F-4-420
4-214