Canon imageRUNNER ADVANCE 6075 Series Service Manual page 506

4
Parts Replacement and Clearning > Fixing > Separating the Fixing Upper Unit from the Fixing Lower Unit
<Procedure>
1) Remove the Fixing Drive Unit 2.
• Wire Saddle
• Reuse Band
• 2 Connectors
• 2 Screws
x2
2) Remove the Fixing Pin.
• 1 Screw
4 Parts Replacement and Clearning > Fixing > Separating the Fixing Upper Unit from the Fixing Lower Unit
x2
F-4-332
F-4-333
3) Disconnect the 5 Connectors on the other side of the Fixing Assembly.
• Wire Saddle
4) Remove the Fixing Pin.
• 1 Screw
NOTE:
Because it is engaged, hold the Fixing Upper Unit to remove the Fixing Pin.
x5
5) Separate the Fixing Upper Unit from the Fixing Lower Unit.
Fixing Upper Unit
4-185
F-4-334
Fixing Lower Unit
F-4-335
4-185