Canon imageRUNNER ADVANCE 6075 Series Service Manual page 908

COPIER > OPTION > DSPLY-SW
IMGC-ADJ Dis/hide of img adj item in user mode
Lv.1 Details To set whether to display or hide the item relating to image
adjustment in user mode.
When selecting display setting, detailed image adjustment procedure
will be displayed only for the duplicated paper specified with the
following settings: Preferences> Paper Settings> Set Paper Type
Management.
Use case As needed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related user mode Preferences> Paper Settings> Set Paper Type Management
UI-RSCAN Display/hide of remote scan screen
Lv.2 Details To set whether to display or hide the remote scan screen on the
Control Panel.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-EPRNT Display/hide of extended print screen
Lv.2 Details To set whether to display or hide the extended print screen (print
screen for print server).
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-WEB Display/hide of Web browser screen
Lv.2 Details To set whether to display or hide the Web browser screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
8
Service Mode > COPIER > OPTION > DSPLY-SW
8 Service Mode > COPIER > OPTION > DSPLY-SW
COPIER > OPTION > DSPLY-SW
UI-HOLD Display/hide of hold job screen
Lv.2 Details To set whether to display the hold job screen on the Control Panel.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
OPEMANT ON/OFF of operator maintenance mode
Lv.2 Details To set ON/OFF of operator maintenance mode.
When setting to ON, "Operator Maintenance Mode" is displayed on
the Settings/Registration screen.
Use case When starting operator maintenance
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related user mode Settings/Registration > Operator Maintenance Mode
OPLOG-SW Dis/hide of error log in operator mntc
Lv.2 Details To set whether to display or hide error/jam/alarm-2 log in operator
maintenance mode.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
OP-ALMT Set warning mssg timing in operator mntc
Lv.2 Details To set the timing to display warning message of parts replacement/
cleaning counter in operator maintenance mode.
With this setting, warning message is displayed once before reaching
the specified life of parts or number of sheets for cleaning.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: At 100%, 1: At 90% and 100%
Default value 0
8-126
8-126