Canon imageRUNNER ADVANCE 6075 Series Service Manual page 267

2
Technology > MEAP > Using USB Devices > USB Device report print
3) Press or button for several times until [USBH-PRT] is shown. Press [USBH-PRT]
button.
4) When pressing [OK] button, [ACTIVE] blinks on the status field.
5) When [OK] is shown on the status field, the status print is output. Check the contents of the
print.
2 Technology > MEAP > Using USB Devices > USB Device report print
Example of output result
USB device information
T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver=2.00 Cls=00(>ifc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04bb ProdID=0c2a Rev=bb.03
S: Manifacturer=I-O DATA
S: Product=USB Flash Disk
S: SerialNumber=A0C0470407000073
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#= 0 Alt=0 #EPs=2 Cls=08(stor.) Sub=06 Prot=50 Driver=sub-storage
E: Ad=81(I) Atr=02(Bulk) MxPS=512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=512 Ivl=31875us
F-2-305
MEAP oreferred device information
AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3
AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3
AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3
F-2-306
● USB device information Content
Display the information of the USB device, which the device recognized.
If not displayed, there may be some fault occurred.
Some of standard optional devices are not displayed on a report.
The details of each item are as follows.
T : Topology
Internal hierarchical structure, which a USB device is connected, is shown. The number of a
connected bus, the hierarchical structure and connection speed can be indicated.
D : Device
Information of USB devices is shown.
F-2-307
********************************
*** USB Device report print ***
********************************
VID=04A9
VID=1234
VID=4321
Application ID Vendor ID Product ID
2-213
PID=2680
PID=5678
PID=8765
F-2-308
2-213