10) Open the Controller Box, and disconnect the Signal Cable and the Power Supply Cable
on the host machine. (Disconnected cables will not be used.)
• 2 Connectors
• 9 Wire Saddles
• 2 Edge Saddles
x2
x11
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Removing the HDD and HDD Case Unit
11) Remove the HDD Case Unit.
• 2 Screws (The removed screws will be used in "Installing the HDD Case Unit" step 1).)
F-9-277
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Removing the HDD and HDD Case Unit
x2
F-9-278
9-122
9-122