Canon imageRUNNER ADVANCE 6075 Series Service Manual page 889

COPIER > FUNCTION > CLEAR
CA-KEY Deletion of CA certificate and key pair
Lv.2 Details To simultaneously delete the CA certificate and key pair which are
additionally registered by the user.
Use case When a service person replaces/discards the device
Adj/set/operate method 1) Select the item, and then press OK key.
2) Check that OK is displayed.
3) Turn OFF/ON the main power switch.
Caution - Unless this item is executed at the time of replacement/discard
of the device, the CA certificate and key pair which are additionally
registered by the user remain in the HDD, which is a problem in
terms of security.
- Do not execute this item carelessly because the CA certificate
and key pair which are additionally registered are deleted when
it is executed. If they are deleted mistakenly, they need to be
again registered by the user. If no CA certificate and key pair are
additionally registered, the machine condition becomes the same as
the one at the time of factory shipment.
- When NG is displayed in 2), there is a possibility that deletion was
not executed. In this case, surely execute the deletion by initializing
the HDD, etc.
Display/adj/set range At normal termination: OK, At abnormal termination: NG
Supplement/memo - The CA certificate is used in the MEAP application with E-RDS and
SSL client connection, and the key pair is used in the SSL function of
IPP, RUI and MEAP.
- When the main power switch is turned OFF/ON, the CA certificate
and key pair which were registered at the time of factory shipment
are decompressed from the archive (/BOOTDEV/KCMNG), and
become available in the E-RDS/SSL function.
ERDS-DAT Initialization of E-RDS SRAM data
Lv.1 Details To initialize the SCM value of the Embedded-RDS stored in the
SRAM.
SCM values are ON/OFF of E-RDS, server's port number, server's
SOAP URL, and communication schedule with the server (how often
the data is acquired), etc.
The value set by COPIER> FUNCTION> INSTALL> E-RDS, RGW-
PORT, RGW-ADR, COM-LOG is cleared.
Use case When upgrading the Bootable in the E-RDS environment
Adj/set/operate method Select the item, and then press OK key.
Caution The method of using the SRAM in E-RDS differs depending on the
Bootable version. Therefore, unless the SRAM data is cleared at the
time of version upgrade, data inconsistency occurs.
Display/adj/set range At normal termination: OK, At abnormal termination: NG
Related service mode COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, RGW-ADR,
COM-LOG
8
Service Mode > COPIER > FUNCTION > CLEAR
8 Service Mode > COPIER > FUNCTION > CLEAR
COPIER > FUNCTION > CLEAR
KEY-CLR Encrypt key clear of HDD Encrypt Board
Lv.2 Details To clear the encryption key of the HDD Encryption Board (Security
Kit) for replacement.
Processing is executed at the time of replacement of the Encryption
Board, and a new encryption key is generated.
Use case When replacing the encryption key for the HDD Encryption Board
Adj/set/operate method 1) Select the item, and then press OK key.
2) Check that OK is displayed.
2) Turn OFF/ON the main power switch.
Caution Since all data in the HDD becomes unavailable when executing this
item, be sure to initialize the HDD after turning OFF/ON the main
power switch.
Display/adj/set range At normal termination: OK, At abnormal termination: NG
USBM-CLR Initialize USB MEAP priority rgst info
Lv.1 Details To initialize the registered ID data retained in the OS field by calling
the API provided by the OS.
Use case When a failure occurs in USB MEAP priority registration
JV-CACHE Cache clear of JAVA application
Lv.1 Details To clear the cache information used by JAVA application.
Use case When initializing the JAVA application
Adj/set/operate method Select the item, and then press OK key.
FXTX-CLR Clearing fax job information
Lv.1 Details To clear fax job information stored on SRAM.
Use this mode to restore from E611-0001.
Use case When E611-0001 occurs
Adj/set/operate method Select the item, and then press OK key.
TR-BLT Clearing Transfer Belt parts counter
Lv.1 Details To clear ETB parts counter when replacing to a new Transfer Belt
(ETB).
Use case When replacing to a new ETB
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> COUNTER> DRBL-1> TR-BLT
GRD-CRNT Init of Primary Charging Wire current VL
Lv.1 Details To initialize the current value of the Primary Charging Wire by
initializing the voltage value of the grid wire.
The current value of the Primary Charging Wire is linked with the
usage status; thus, execute initialization at the time of replacement.
Use case When replacing the Primary Charging Wire
Adj/set/operate method Select the item, and then press OK key.
LANG-CLR Uninstallation of local language:Java UI
Lv.2 Details To uninstall the local language (Java UI).
If this mode is executed, the language files other than English and
Japanese are deleted. Screen is displayed in English.
Use case When uninstalling the local language
Adj/set/operate method 1) Select the item, and then press OK key.
2) Reboot the machine.
8-107
T-8-48
8-107