4
Parts Replacement and Clearning > Image Formation System > Removing the ETB Brush Roller
Removing the ETB Cleaning Blade
<Preparation>
1. Pull out the Fixing Feed Unit. (Refer to "Removing the ETB Unit")
2. Remove the ETB Unit. (Refer to page 4-137)
<Procedure>
1) Remove the ETB Cleaning Blade.
• 4 Screws
x4
4
Parts Replacement and Clearning > Image Formation System > Removing the ETB Brush Roller
Removing the ETB Brush Roller
<Preparation>
1. Pull out the Fixing Feed Unit. (Refer to "Removing the ETB Unit")
2. Remove the ETB Unit. (Refer to page 4-137)
<Procedure>
1) Remove the Post-transfer Guide.
• 1 Screw
F-4-200
4-142
F-4-201
4-142