Check Items When Turning Off The Main Power; Installation Procedure (Paper Deck Unit-A1) - Canon imageRUNNER ADVANCE 6075 Series Service Manual

Check Items when Turning OFF the Main Power

Check that the main power switch is OFF.
1) Turn OFF the main power switch of the host machine.
2) Be sure that Control Panel Display and Main Power Lamp are both turned OFF, and then
disconnect the power plug.
CAUTION:
When installing the heater to the paper deck, take the following precautions.
a. The AC power plug of the host machine must have been removed from the outlet.
b. Install the heater after installing the host machine and paper deck.
c. Use correct screws (length and diameters) at correct positions.

Installation Procedure (Paper Deck Unit-A1)

1) Disconnect the connector of the paper deck from the host machine.
9
Installation > Paper Deck Heater Unit-A1 > Installation Procedure (Paper Deck Unit-A1)
2) Release the paper deck from the host machine, and then press down the latch plate of the
paper deck housing with your finger to open the housing.
x1
x1
F-9-126
9 Installation > Paper Deck Heater Unit-A1 > Installation Procedure (Paper Deck Unit-A1)
9-59
F-9-127
9-59