Removing The Developing Cylinder And The Developing Roller - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > Image Formation System > Removing the Developing Cylinder and the Developing Roller
3) Remove toner in the main body.
4 Parts Replacement and Clearning > Image Formation System > Removing the Developing Cylinder and the Developing Roller
Removing the Developing Cylinder and the Developing
Roller
<Preparation>
1. Remove the Developing Assembly. (Refer to page 4-129)
2. Remove the Developing Cylinder Blade.
NOTE:
When the Developing Assembly is put on the floor or the desk, be sure to place paper
underneath to work on the Developing Assembly.
2-1)
• 4 Screws
• 5 Claws
• 2 Protrusions
F-4-176
2-2)
Remove the Developing Assembly Cover.
x4
x5
Empty the toner in the Developing Assembly on the paper.
4-132
F-4-177
4-132