Canon imageRUNNER ADVANCE 6075 Series Service Manual page 939

COPIER > OPTION > USER
COPY-JOB Setting of copy job reservation
Lv.1 Details To set to enable/disable copy job reservation when the Card Reader/
Coin Manager is used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
OP-SZ-DT Orgnl size dtct ON/OFF at copyboard open
Lv.2 Details To set ON/OFF of original size detection while the Copyboard is
opened.
When "0: OFF" is set, enter original size manually from the Control
Panel.
When "1: ON" is set, original size is detected automatically.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
NW-SCAN Setting of network scan function usage
Lv.2 Details To set to enable/disable use of network scan function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - Do not change this mode in Japan.
- For PS/PCL machines for overseas (outside Japan), fix the setting
value as "1: Enabled". For others, permit the use.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
HDCR-DSP Setting of HDD complete delete method
Lv.2 Details To set data deletion method of HDD data complete deletion function.
Use case When switching the deletion method in HDD data complete deletion
mode
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 4
1: 1-time deletion with 0 data, 2: 1-time deletion with random data, 3:
3-time deletion with random data, 4: DOD
Default value 1
Supplement/memo HDD data complete deletion function: a function to completely delete
data in HDD by overwriting with 0 (null) data or random data to the
file data when logically deleting file on HDD (deleting management
information data).
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
JOB-INVL Job intvl setting at interruption copy
Lv.2 Details To set output interval between jobs at the time of interruption copy.
Sorting is difficult after interruption copy because of the continuous
output of the next job. Paper interval becomes longer when starting
pickup for the next job after the last sheet of the previous job is
delivered.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: Continuous output of the interruption copy and the next job
1: Starting pickup for the next job after the interruption copy is
delivered all.
2: Starting pickup for the next job after the previous job is delivered
all. (For all jobs)
Default value 0
TAB-ROT Set of landscape img rotn at PDL:tab ppr
Lv.1 Details To set whether to rotate landscape image by 180 degrees when PDL
print is made on tab paper.
When "1: Rotated" is set, image is rotated.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not rotated, 1: Rotated
Default value 0
PR-PSESW Display/hide of output Stop button
Lv.1 Details To set whether to display or hide [Stop] button on the Status Monitor
screen.
Use case - Upon user's request
- When promptly stopping the print job in operation or under
reservation
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
8-157
8-157