Checking After Installation; Operation Check - Canon imageRUNNER ADVANCE 6075 Series Service Manual

18) Insert the Speaker Cable to the Speaker Unit (Upper).
19) Put the Speaker Cable through the Cord Guide, and install the cover of the guide.
CAUTION:
Be sure to slack off [A] part for not interfering to open/close the Right Rear Cover 1.
9
Installation > Voice Guidance Kit-F1/F2 > Operation Check
F-9-223
[A]
F-9-224
9 Installation > Voice Guidance Kit-F1/F2 > Operation Check
20) Connect the power plug of the host machine to the power outlet.
21) Open the switch cover and turn ON the main power switch.

Checking after Installation

1) Select Settings/Registration > Preferences > Accessibility > Voice Navigation Settings >
Use Voice Navigation, and check that the setting is ON.
2) Select Settings/Registration > Preferences > Accessibility > Voice Navigation Settings >
Voice Guide from Speakers, and check that the setting is ON.

Operation Check

<When Starting to Use>
1) Press reset key 3 secs or more.
2) Press [Main Menu] in Control Panel.
3) If the display in panel screen is boxed with red frame, "Voice Guidance Kit" is available.
If "Voice Guidance Kit" doesn't properly operate, check the below.
• Enter Service Mode > COPIER > DISPLAY > VERSION, and check whether languages to be
used for TTS-JA/TTS-EN/TTS-IT/TTS-FR/TTS-ES/TTS-DE are properly installed.
<When Stopping to Use>
1) Press the Reset Key for 3 secs or more.
9-93
9-93