Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1180

6) Fold extra length of the cable and secure it with the 2 Wire Saddles [A].
x2
7) Connect the STS Cable (340mm (Light Blue); FM3-9152) to the Main Controller PCB 2 and
the Mirroring Board or Encryption Board.
• 2 Connectors
• 1 Edge Saddle
• 5 Wire Saddles
CAUTION:
Check that the STS Cable is connected properly at the time of installation because the
machine can operate even when the cable is not connected properly.
x2
Connector
x6
9
Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
[A]
F-9-391
Connector
F-9-392
9 Installation > [TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit > Installation Procedure > Installing th
8) Install the LED Board to the side surface of the HDD Case Unit.
• 2 Screws (TP; M3x6)
9-183
x2
F-9-393
9-183