Canon imageRUNNER ADVANCE 6075 Series Service Manual page 819

COPIER > DISPLAY > CCD
GAIN2-OG Gain level of Img Sensor odd bit(G): bck
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the Green gain level adjustment value in odd-numbered
bit on CMOS Sensor of Scanner Unit (paper back).
Continuous display of upper limit is considered a failure of the
Scanner Unit/Reader Controller PCB.
Use case - When replacing the Reader Controller PCB
- At scanned image failure
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 48
Appropriate target value 1 to 47
GAIN2-OB Gain level of Img Sensor odd bit(B): bck
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the Blue gain level adjustment value in odd-numbered bit
on CMOS Sensor of Scanner Unit (paper back).
Continuous display of upper limit is considered a failure of the
Scanner Unit/Reader Controller PCB.
Use case - When replacing the Reader Controller PCB
- At scanned image failure
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 48
Appropriate target value 1 to 47
GAIN2-ER Gain level of Img Sensor even bit(R):bck
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the Red gain level adjustment value in even-numbered bit
on CMOS Sensor of Scanner Unit (paper back).
Continuous display of upper limit is considered a failure of the
Scanner Unit/Reader Controller PCB.
Use case - When replacing the Reader Controller PCB
- At scanned image failure
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 48
Appropriate target value 1 to 47
8
Service Mode > COPIER > DISPLAY > CCD
8 Service Mode > COPIER > DISPLAY > CCD
COPIER > DISPLAY > CCD
GAIN2-EG Gain level of Img Sensor even bit(G):bck
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the Green gain level adjustment value in even-numbered
bit on CMOS Sensor of Scanner Unit (paper back).
Continuous display of upper limit is considered a failure of the
Scanner Unit/Reader Controller PCB.
Use case - When replacing the Reader Controller PCB
- At scanned image failure
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 48
Appropriate target value 1 to 47
GAIN2-EB Gain level of Img Sensor even bit(B):bck
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the Blue gain level adjustment value in even-numbered bit
on CMOS Sensor of Scanner Unit (paper back).
Continuous display of upper limit is considered a failure of the
Scanner Unit/Reader Controller PCB.
Use case - When replacing the Reader Controller PCB
- At scanned image failure
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 48
Appropriate target value 1 to 47
OFST2-CL Img Sensor offset value (color) [Back]
Lv.2 Details This service mode can be used for the model with Duplex Color
Image Reader Unit-C1 only.
To display the CMOS Sensor offset value at color scanning.
Use case When image failure occurs at back side scanning in color mode
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 96
Appropriate target value 1 to 95
8-37
T-8-8
8-37