Analog - Canon imageRUNNER ADVANCE 6075 Series Service Manual

■ ANALOG

COPIER > DISPLAY > ANALOG
TEMP Display of inside temperature
Lv.1 Details To display the temperature inside the machine detected by
Environment Sensor.
Use case When checking the temperature inside the machine
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 60
Unit Deg C
Appropriate target value 20 to 27
Related service mode COPIER> DISPLAY> ANALOG> HUM, ABS-HUM, PDK-TEMP
HUM Display of inside humidity
Lv.1 Details To display the humidity inside the machine detected by Environment
Sensor.
Use case When checking the humidity inside the machine
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 100
Unit %
Appropriate target value 30 to 70
Related service mode COPIER> DISPLAY> ANALOG> TEMP, ABS-HUM, PDK-HUM
ABS-HUM Display of inside moisture content
Lv.1 Details To display the absolute moisture content inside the machine detected
by Environment Sensor.
Use case When checking the moisture content inside the machine
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 100
Unit g (g/m3)
Appropriate target value 0 to 22
Related service mode COPIER> DISPLAY> ANALOG> TEMP, HUM
FIX-U Dis of Fixing Roller center temperature
Lv.1 Details To display the center temperature of the Fixing Roller detected by
the Fixing Main Thermistor.
Use case When checking the temperature at the center of Fixing Roller
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 999
Unit Deg C
FIX-UE Dis of Fixing Roller edge temperature
Lv.1 Details To display the edge temperature of the Fixing Roller detected by the
Fixing Sub Thermistor 1.
Fixing Sub Thermistor 1 is located in the rear nip inlet side of Fixing
Roller.
Use case When checking the edge temperature of the Fixing Roller
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 999
Unit Deg C
8
Service Mode > COPIER > DISPLAY > ANALOG
8 Service Mode > COPIER > DISPLAY > ANALOG
COPIER > DISPLAY > ANALOG
FIX-SHTR Display of Fixing Shutter temperature
Lv.1 Details To display the temperature of the Fixing Shutter detected by the
Fixing Shutter Thermistor.
Use case When checking the temperature of Fixing Shutter
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 999
Unit Deg C
PDK-TEMP Dis of POD Deck compartment temp
Lv.1 Details To display the compartment temperature of POD Deck Lite.
It may be out of order if the indicated temperature is greatly different
from the machine right after power-on.
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 60
Unit Deg C
Related service mode COPIER> DISPLAY> ANALOG> TEMP, PDK-HUM
PDK-HUM Dis of POD Deck compartment humidity
Lv.1 Details To display the compartment humidity of POD Deck Lite.
It may be out of order if the indicated temperature is greatly different
from the machine right after power-on.
Adj/set/operate method N/A (Display only)
Display/adj/set range 0 to 100
Unit %
Related service mode COPIER> DISPLAY> ANALOG> HUM, PDK-TEMP
8-32
T-8-5
8-32