Replacing The Primary Charging Assembly Grid Wire - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > Image Formation System > Replacing the Primary Charging Assembly Grid Wire

Replacing the Primary Charging Assembly Grid Wire

<Preparation>
1. Open the Front Cover.
2. Open the Inner Cover. (Refer to "Removing the Primary Charging Assembly")
3. Remove the Primary Charging Assembly. (Refer to page 4-97)
4.Removing the Primary Charging Shutter Unit (Refer to page 4-147)
<Procedure>
1) Remove the Primary Charging Assembly Grid Wire
• 1 Screw
2) Shift the Primary Charging Wire Cleaners (Left and Right).
• 2 Screws (to loosen)
Primary Charging
Wire Cleaners (Left )
4 Parts Replacement and Clearning > Image Formation System > Replacing the Primary Charging Assembly Grid Wire
Screw
Grid Wire
F-4-98
Primary Charging
Wire Cleaners (Right)
Screws
F-4-99
3) Loosen the 4 screws fixing the Motor Unit in the front.
Screws
4) Loosen the screw and turn over the Primary Charging Assembly.
5) Push the front Motor Unit in the direction of the arrow and tighten the 4 screws.
turn over
Screw
4-101
F-4-100
Screws
Push
Motor Unit
Motor Unit
F-4-101
4-101