Canon imageRUNNER ADVANCE 6075 Series Service Manual page 712

E Detail
Location Item
Code Code
E540 -8006 -05 Title The Tray 1 Shift Motor acceleration error (Finisher-E1)
Remedy 1. The Tray 1 Shift Area Sensor PCB is faulty.
2. The wiring between the Finisher Controller PCB and Tray 1
Shift Motor is faulty.
3. The tray up/down mechanism is faulty.
4. The Tray 1 Shift Motor (M107) is faulty.
5. The Finisher Controller PCB is faulty.
Description The lock detection signal does not turn ON when the Tray 1
Shift Motor has been driven for 1 second.
E540 -8007 -05 Title The Tray 1 Shift Motor error (Finisher-E1)
Remedy 1. The Tray 1 Shift Area Sensor PCB is faulty.
2. The wiring between the Finisher Controller PCB and Tray 1
Shift Motor is faulty.
3. The tray up/down mechanism is faulty.
4. The Tray 1 Shift Motor (M107) is faulty.
5. The Finisher Controller PCB is faulty.
Description The lock detection signal does not turn OFF when the Tray 1
Shift Motor is at a stop.
E542 -8001 -05 Title Tray 1 time out error (Finisher-E1)
Remedy 1. The Tray 2 shift area Sensor PCB is faulty.
2. The wiring between the Finisher Controller PCB and Tray 2
Shift Motor is faulty.
3. The tray up/down mechanism is faulty.
4. The Tray 2 shift Motor (M105) is faulty.
5. The Finisher Controller PCB is faulty.
Description 1. If the tray does not return to home position when the Tray 1
Shift Motor is driven for 25 seconds.
2. If the tray does not move to other area when Tray 2 Shift
Motor is driven for 5 seconds.
E542 -8002 -05 Title Tray 2 shift area error (Finisher-E1)
Remedy 1. The Tray 2 Shift Area Sensor PCB is faulty.
2. The wiring between the Finisher Controller PCB and Tray 2
Shift Motor is faulty.
3. The tray up/down mechanism is faulty.
4. The Tray 2 Shift Motor (M105) is faulty.
5. The Finisher Controller PCB is faulty.
Description 1. The upper limit area is reached before the Tray 2 Paper
Surface Sensor 1 detects the paper surface during paper
surface detection operation.
2. A discontinuous area is detected during tray operation.
3. During evacuation operation, arrival at the area beyond
the Tray 2 Paper Surface Sensor 2 is detected before this
Sensor detects paper surface.
7
Error Code > Error Code > Error Code Details > E500 to E5F6
Description
7 Error Code > Error Code > Error Code Details > E500 to E5F6
E Detail
Location Item
Code Code
E542 -8004 -05 Title The Tray 2 Shift Motor clock error (Finisher-E1)
Remedy 1. The Tray 2 Shift Area Sensor PCB is faulty.
2. The wiring between the Finisher Controller PCB and Tray 2
Shift Motor is faulty.
3. The tray up/down mechanism is faulty.
4. The Tray 2 Shift Motor (M105) is faulty.
5. The Finisher Controller PCB is faulty.
Description The FG input cannot be detected when the Tray 2 Shift Motor
has been driven for 0.2 second.
E542 -8005 -05 Title The Tray 2 Shift Motor speed error (Finisher-E1)
Remedy 1. The Tray 2 Shift Area Sensor PCB is faulty.
2. The wiring between the Finisher Controller PCB and Tray 2
Shift Motor is faulty.
3. The tray up/down mechanism is faulty.
4. The Tray 2 Shift Motor (M105) is faulty.
5. The Finisher Controller PCB is faulty.
Description The lock detection signal turns OFF 150 msec after the lock
detection signal turned ON.
E542 -8006 -05 Title The Tray 2 Shift Motor acceleration error (Finisher-E1)
Remedy 1. The Tray 2 Shift Area Sensor PCB is faulty.
2. The wiring between the Finisher Controller PCB and Tray 2
Shift Motor is faulty.
3. The tray up/down mechanism is faulty.
4. The Tray 2 Shift Motor (M105) is faulty.
5. The Finisher Controller PCB is faulty.
Description The lock detection signal does not turn ON when the Tray 2
Shift Motor has been driven for 1 second.
E542 -8007 -05 Title The Tray 2 Shift Motor error (Finisher-E1)
Remedy 1. The Tray 2 Shift Area Sensor PCB is faulty.
2. The wiring between the Finisher Controller PCB and Tray 2
Shift Motor is faulty.
3. The tray up/down mechanism is faulty.
4. The Tray 2 Shift Motor (M105) is faulty.
5. The Finisher Controller PCB is faulty.
Description The lock detection signal does not turn OFF when the Tray 2
Shift Motor is at a stop.
E551 -0011 -05 Title Error in the Power Supply Fan of the Insertion Unit
Remedy 1. The connector of the Fan (F1) is disconnected.
2. The wiring of the Fan (F1) is faulty.
3. The Fan (F1) is faulty.
4. The Insertion Unit Controller PCB is faulty.
Description The loch signal is detected for the specified times while the
fan operates.
7-27
Description
7-27