Canon imageRUNNER ADVANCE 6075 Series Service Manual page 481

4
Parts Replacement and Clearning > Image Formation System > Removing the Hopper Unit
7) Remove the Toner Receptacle Tray.
• 1 Screw
• 1 Protrusion
CAUTION:
1. Toner can be accumulated in the Toner Receptacle Tray; therefore, be careful not to
spill toner when removing.
2. Be sure to fit the protrusion into the groove of the plate to install.
NOTE:
Clean the Toner Receptacle Tray with lint-free paper.
4 Parts Replacement and Clearning > Image Formation System > Removing the Hopper Unit
8) Remove the Connecting Drive Unit.
• 1 Screw
9) Pull out the Fixing Feed Unit.
F-4-251
CAUTION:
When pulling out the Fixing Feed Unit, be sure to place paper over the ETB Unit for
protection.
F-4-252
4-160
F-4-253
F-4-254
4-160