Canon imageRUNNER ADVANCE 6075 Series Service Manual page 553

4
Parts Replacement and Clearning > External Auxiliary System > Removing the DC Controller PCB
<Procedure>
1) Remove the Controller Box Inner Cover.
• 4 Screws (TP)
x4
2) Disconnect the 17 Connectors.
x17
4 Parts Replacement and Clearning > External Auxiliary System > Removing the DC Controller PCB
3) Remove the DC Controller PCB in the direction of the arrow.
• 8 Screws
F-4-482
CAUTION:Points to Caution at Installation
Be sure to securely connect the Connector at the back of the DC Controller PCB.
F-4-483
x8
F-4-484
4-232
F-4-485
4-232