Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1121

NOTE:
Use the parts disassembled in step 1) and parts included in the Removable HDD Kit.
2) Assemble the HDD disassembled in step 1).
• 1 HDD Support Plate
• 1 HDD Connector Plate (Included in the Removable HDD Kit)
• 1 HDD
• 4 Screws (W Sems)
x4
9
Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Disassembling and Assembling of the HDD Removed from the Host Machin
HDD
Connector
HDD Connector
Plate
HDD Support Plate
F-9-281
9 Installation > [TYPE-2] Removable HDD Kit > Installation Procedure > Disassembling and Assembling of the HDD Removed from the Host Machin
3) Install the Conversion Connector.
CAUTION:
Be sure that there is no gap between the HDD Connector and the Conversion
Connector.
9-124
F-9-282
9-124