Canon imageRUNNER ADVANCE 6075 Series Service Manual page 1220

9) Connect the LED Cable (310mm; FM3-9158) to the LED Board and the Encryption Board.
• 2 Connectors
• 6 Wire Saddles
CAUTION:
• Secure the LED Cable in the direction of the arrow.
• Check that the LED Cable is connected properly at the time of installation because
the machine can operate even when the cable is not connected properly.
x2
x6
9
Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
10) Insert the assembled HDD.
11) Secure the HDD Fixed Plate.
• 1 screw (Use the screws removed in "Removing the Covers" step 7).)
F-9-456
9 Installation > [TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit > Installing the Encryption Board
Connector side
9-223
F-9-457
F-9-458
9-223