Cleaning The Pickup And Fixing Feed Assembly - Canon imageRUNNER ADVANCE 6075 Series Service Manual

4
Parts Replacement and Clearning > Pickup/Feed System > Cleaning the Pickup and Fixing Feed Assembly
CAUTION:
Installation work gets difficult if the plate and the spring (as shown in the figure) are
removed when removing the cover; therefore, be careful not to remove them.
2) Remove the Multi-purpose Tray Separation Roller.
• 1 Claw
4 Parts Replacement and Clearning > Pickup/Feed System > Cleaning the Pickup and Fixing Feed Assembly

Cleaning the Pickup and Fixing Feed Assembly

<Cleaning the Vertical Path Assembly>
1) Open the Right Cover.
2) Open the Right Lower Cover.
3) Open the Multi-purpose Tray Pickup Guide Unit, and clean the 2 areas of the Feed Guide [A].
(Remove paper lint.)
4) Clean a whole circumference of 2 Rollers [B] and the 3 Rollers [C] by manually rotating
them with lint-free paper moistened with alcohol.
CAUTION:
When rotating the Roller by hand, do not touch the surface of the Roller. Be sure to hold
the side of the Roller to rotate manually.
F-4-392
F-4-393
[B]
[A]
[C]
4-207
F-4-394
4-207