Canon imageRUNNER ADVANCE 6075 Series Service Manual page 962

COPIER > OPTION > LCNS-TR
ST-LIPS5 Install state dis:LIPS LX/LIPS4 func: JP
Lv.2 Details To display installation state of LIPS LX/LIPS4 function (JP only) when
transfer is disabled.
Use case When checking whether LIPS LX/LIPS4 function (JP only) is installed
Adj/set/operate method 1) Select ST-LIPS5.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-LIPS5.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-LIPS5 Trns lcns key dis:LIPS LX/LIPS4 func: JP
Lv.2 Details To display transfer license key to use LIPS LX/LIPS4 function (JP
only) when transfer is disabled.
Use case - When replacing HDD
- When replacing the device
Adj/set/operate method 1) Select ST-LIPS5.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-LIPS5.
Display/adj/set range 24 digits
ST-LIPS4 Install state display of LIPS4 func: JP
Lv.2 Details To display installation state of LIPS4 function (JP only) when transfer
is disabled.
Use case When checking whether LIPS4 function (JP only) is installed
Adj/set/operate method 1) Select ST-LIPS4.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-LIPS4.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-LIPS4 Trns license key dis of LIPS4 func: JP
Lv.2 Details To display transfer license key to use LIPS4 function (JP only) when
transfer is disabled.
Use case - When replacing HDD
- When replacing the device
Adj/set/operate method 1) Select ST-LIPS4.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-LIPS4.
Display/adj/set range 24 digits
8
Service Mode > COPIER > OPTION > LCNS-TR
8 Service Mode > COPIER > OPTION > LCNS-TR
COPIER > OPTION > LCNS-TR
ST-PSPCL Install state dis of PS/PCL function
Lv.2 Details To display installation state of PS/PCL function when transfer is
disabled.
Use case When checking whether PS/PCL function is installed
Adj/set/operate method 1) Select ST-PSPCL.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PSPCL.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-PSPCL Transfer license key dis of PS/PCL func
Lv.2 Details To display transfer license key to use PS/PCL function when transfer
is disabled.
Use case - When replacing HDD
- When replacing the device
Adj/set/operate method 1) Select ST-PSPCL.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PSPCL.
Display/adj/set range 24 digits
ST-PCLUF Install state dis of PCL/UFR II function
Lv.2 Details To display installation state of PCL/UFR II function when transfer is
disabled.
Use case When checking whether PCL/UFR II function is installed
Adj/set/operate method 1) Select ST-PCLUF.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PCLUF.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-PCLUF Trns license key dis of PCL/UFR II func
Lv.2 Details To display transfer license key to use PCL/UFR II function when
transfer is disabled.
Use case - When replacing HDD
- When replacing the device
Adj/set/operate method 1) Select ST-PCLUF.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PCLUF.
Display/adj/set range 24 digits
8-180
8-180