Canon imageRUNNER ADVANCE 6075 Series Service Manual page 647

■ Backup
● [5]: Backup
CAUTION:
This function includes R&D review.Do not usually use it other than the following
function.
The USB memory collecting log uses the USB memory where You registered a system
software for this Host machine with by SST.
Operation procedure
1) Enter download mode.
2) Connect the USB memory storage device to the USB port.
3) Press the key on the Control Panel.
[5] -> [0]: To execute formating /Any key other than [0] key: To return to the menu screen.
4) SRAM backup of Main Controller PCB 2
[1] Sublog -> Collect debugging log.
[4] ServicePrint -> Save the service data which P-PRINT or etc. output to paper with a text
format.
[[[[[ Backup Menu (USB) ]]]]]]]]]]]]
ーーーーーーーーーーーーーーーーーー
[1]: Sublog
[4]: ServicePrint
[5]: Netcap
[C]: Return to Main Menu
■ Clearing Download File
● [7]: Clear downloaded files
This menu clears the system software stored in the temporary storage area of the HDD.
6
Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Other Menu
F-6-138
6 Troubleshooting > Version upgrade > Version Upgrade using USB memory Storage Device > Other Menu
This function is used to clear the downloaded file without writing it after downloading the
system software in menu [2] or [3].
Operation procedure
1) After downloading by menu [2] or [3], press the "Reset" key to execute shutdown
sequence, and then turn OFF the main power once the screen display disappears.
2) Start the machine in safe mode (while pressing 2 + 8 keys at the same time, turn ON the
Main Power Switch).
If the system software is stored in the HDD temporary storage area when starting the
machine in safe mode, the system software is deleted. In such a case, the following message
is displayed on the touch panel.
"All downloaded file is deleted."
3) Turn OFF the Main Power Switch.
4) Remove the USB memory storage device.
■ Download Menu 2
● [8]: Download Menu 2
[8]: Download Menu 2
[1]: Service Mode Password Clear
[[[[[ download Menu 2nd (USB) ]]]]]]
------------------------------------
[1]: Service Mode Password Clear
[C]: Return to Main Menu
■ Other Menu
● [9]: Other Menu
This mode displays other menu.
Operation procedure
1) Enter download mode.
2) Connect the USB memory storage device to the USB port.
3) Press the key on the Control Panel.
[9] -> [0]: To display other menu/Any key other than [0] key: To return to the menu screen.
6-71
F-6-139
6-71