Canon imageRUNNER ADVANCE 6075 Series Service Manual page 968

COPIER > TEST > NETWORK
PING-IP6 PING transmission to IPv6 address
Lv.1 Details To send PING to the address specified by IPV6-ADR.
The network connection condition in the IPv6 environment can be
checked.
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> TEST> NETWORK> IPV6-ADR
IPSECPOL Polling test of IPSec Encryption Board
Lv.1 Details To execute polling test of IPSec Encryption Board.
To check whether a hardware failure has occurred.
Use case When checking whether a hardware failure has occurred to the
IPSec Encryption Board
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range At normal state: OK
At failure occurrence: NG (0: The board cannot be recognized. 1: An
error occurred to the result.)
Required time Approx. 3 minutes
IPSECINT Interrupt test of IPSec Encryption Board
Lv.1 Details To execute the interrupt test of IPSec Encryption Board.
To check whether a hardware failure has occurred.
Use case When checking whether a hardware failure has occurred to the
IPSec Encryption Board
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range At normal state: OK
At failure occurrence: NG (0: The board cannot be recognized. 1: An
error occurred to the result.)
Required time Approx. 3 minutes
8
Service Mode > COPIER > TEST > NETWORK
T-8-73
8 Service Mode > COPIER > TEST > NETWORK
8-186
8-186