Canon imageRUNNER ADVANCE 6075 Series Service Manual page 704

E Detail
Location Item
Code Code
E263 -0001 -05 Title Current Sensor error
Remedy 1. Check the connection between the AC Driver PCB and the
Main Driver PCB (connector disconnection, open circuit,
short circuit of harness).
AC Driver side: J615, Main Driver side: J103
2. Replace the AC Driver PCB.
3. Replace the Main Driver PCB (PCB2).
Description An error is detected in the value of the Current Sensor (SE601)
(the value remains at the upper limit).
E263 -0002 -05 Title Current Sensor error
Remedy 1. Check the connection between the AC Driver PCB and the
Main Driver PCB (connector disconnection, open circuit,
short circuit of harness).
AC Driver side: J615, Main Driver side: J103
2. Replace the AC Driver PCB.
3. Replace the Main Driver PCB (PCB2).
Description An error is detected in the value of the Current Sensor (SE601)
(the value remains at the lower limit).
E263 -0003 -05 Title Error in Current Sensor accuracy
Remedy 1. Check the connection between the AC Driver PCB and the
Main Driver PCB (connector disconnection, open circuit,
short circuit of harness).
AC Driver side: J615, Main Driver side: J103
2. Replace the AC Driver PCB.
3. Replace the Main Driver PCB (PCB2).
Description The value of the Current Sensor (SE601) is not within the
range of reference value.
E270 -0001 -04 Title Error in paper front vertical scanning synchronous signal
Remedy 1. Connector disconnection/open circuit of the Scanner Unit
(Reader).
2. Connector disconnection/open circuit of the Reader
Controller PCB (PCB1).
3. Failure of the Scanner Unit (Reader).
4. Failure of the Reader Controller PCB (PCB1).
Description Vertical scanning synchronous signal (VSYNC) is not sent
appropriately from the CMOS PCB (Scanner Unit (Paper
Front)), so the image error occurs or the operation stops
abnormally.
7
Error Code > Error Code > Error Code Details > E202 to E280
Description
7 Error Code > Error Code > Error Code Details > E202 to E280
E Detail
Location Item
Code Code
E270 -0002 -04 Title Error in horizontal scanning/vertical scanning synchronous
signal
Remedy 1. Connector disconnection/open circuit of the Scanner Unit
(Reader/DADF).
2. Connector disconnection/open circuit of the Reader
Controller PCB (PCB1).
3. Failure of the Scanner Unit (Reader/DADF).
4. Failure of the Reader Controller PCB (PCB1).
Description Due to the horizontal scanning synchronous signal (HSYNC)
error, the vertical scanning synchronous signal (VSYNC) is
not sent, so the image error occurs or the operation stops
abnormally.
E270 -0101 -04 Title Error in paper back vertical scanning synchronous signal
Remedy 1. Connector disconnection/open circuit of the Scanner Unit
(DADF).
2. Connector disconnection/open circuit of the Reader
Controller PCB (PCB1).
3. Failure of the Scanner Unit (DADF).
4. Failure of the Reader Controller PCB (PCB1).
Description Vertical scanning synchronous signal (VSYNC) is not sent
appropriately from the CMOS PCB (Scanner Unit (Paper
Back)), so the image error occurs or the operation stops
abnormally.
E280 -0001 -04 Title Communication error between Reader Controller PCB (PCB1)
and Scanner Unit (Reader)
Remedy 1. Connector disconnection/open circuit of the Scanner Unit
(Reader).
2. Connector disconnection/open circuit of the Reader
Controller PCB (PCB1).
3. Failure of the Scanner Unit (Reader).
4. Failure of the Reader Controller PCB (PCB1).
Description Within the specified period of time, communication between
the Reader Controller PCB and Scanner Unit (Paper Front) is
not started.
E280 -0101 -04 Title Communication error between Reader Controller PCB (PCB1)
and Scanner Unit (DADF)
Remedy 1. Connector disconnection/open circuit of the Scanner Unit
(DADF).
2. Connector disconnection/open circuit of the Reader
Controller PCB (PCB1).
3. Failure of the Scanner Unit (DADF).
4. Failure of the Reader Controller PCB (PCB1).
Description Within the specified period of time, communication between
the Reader Controller PCB and Scanner Unit (Paper Back) is
not started.
7-19
Description
T-7-6
7-19